Forklift mast lubricant spray replaces INTELLA part number 10203
11 fluid ounces.
Suitable for lubricating forklift masts.
Forklift manufacturers recommend lubricating masts every 500 operating hours or every 6 months, whichever comes first. Intella's Innerslide is the perfect product to get the job done.
Intella's innerslide lubricant is an excellent lubricant because it increases mast rail life with no binding, waste, or mess. It decreases wear and friction on channels and uprights by up to 80%. It's easy to apply and adheres where most other greases just drip off or sling off.
A combination of two premium, tacky greases with molybdenum disulfide, this formula is designed to product a tenacious film of lubricant on any sliding metal surface. The grease provides the benefit of antiwear and extreme-pressure additives, while the molybdenum disulfide creates a burnishing film, providing extra insurance long after the grease may wear away.
Intella's Innerslide aerosol works on forklifts and other material handling equipment to eliminate oil drippage on warehouse and receiving dock floors, preventing rollers from getting out-of-round, cut greasing intervals, and help prevent guide rail wear. Consistent use will eliminate friction overloads on hydraulic rams which could cause seals to wear and leak.
Propellant: Propane and n-Butane
Flash point: N/A
Spray pattern: shot gun blast
Texture: rich brown heavy film
Appearance: black tar
12 per case
NSF acceptable as a lubricant where there is no possibility of food contact (H2) in and around food
processing areas. NSF Registration number 133889. N05625
MSDS available here