Understanding Forklift Tires
Forklift tires come in three basic types.
There are many varieties of the above mentioned types. They can be made of different compounds. Many different sizes and tread patterns are available to meet the needs of different equipment and environments.
Solid Tires are molded onto steel rings of varying widths and diameters. They require a specially equipped press to mount them on your wheel. They can be made out of differing materials to best meet the diverse needs of the material handling industry. Rubber, synthetics and polyurethane are three common examples.
Pneumatic tires are filled with air and commonly used on outdoor and rough terrain fork lifts. They have the benefit of added traction and flotation on semi hard surfaces such as gravel lumber yards. They also provide some cushioning of rough terrain which both adds to the operators comfort and helps prevent damage to the running gear of your forklift. Two major drawbacks to this type of tire are the possibility of flats and unstable loads.
To solve the problem of constant flats many operations resort to having their pneumatic tires filled with foam. The added benefit is increased safety The major drawback being that the entire wheel an tire must be discarded when the tread wears out.
Semi-pneumatic tires can help with eliminating flats and creating a more stable load though not as stable as solid molded tires.
When do I need to replace my tires?
Generally they need to be replaced when the tread is worn down to a
point where they are no longer effective. On non-treaded tires a good
rule of thumb is when they are worn to the top of the lettering on the
side of the tire. If the tires become delaminated from the rim or cause
a rough ride. Remember this is not only uncomfortable for your operator
but the tires act as the only suspension your forklift has. Therefore
running on worn out tires can cause serious damage to the steering and
drive train of your forklift. Replacing tires when they are worn can
save you money on the cost of unnecessary repairs.If you are thinking
to replace your caterpillar
forklift tires, call us at 616-796-6638.
What about tire chains?
If you have pneumatic or semi pneumatic tires you're in luck. Tire chains are a great option for increased traction when needed. Whether it is snow, ice or rough terrain, chains can be installed to keep you going thru the roughest conditions. Just keep in mind that these are a temporary solution and not intended to be left on when conditions do not warrant. Purchasing a set of these chains to have ready when the need arises can be a save a lot of money and prevent dangerous situations. One wrecker bill to get your forklift un-stuck and you will wish you had a set on hand. Tire chains are not available for solid molded (AKA 'cushion') tires.
How do I choose the proper tire?
It depends on the environment that your operation presents. There are tread designs available for especially greasy situations. You can get compounds impregnated with walnut shells or steel wires to increase traction and durability. Smooth tires are good for stability, durability and traction on smooth clean surfaces but can be troublesome on wet or slippery surfaces. Traction type tires are required whenever a forklift is to be used outdoors. Synthetic and poly blends can increase durability but are generally harder and create a rougher ride. They also come at a premium price. They are worth the extra money in the right application. Non-marking tires are available to keep your floors from getting covered in black tire marks.
Forklift tires are an integral part of your forklift. The safe operation of your forklift depends on properly maintained tires.