Crown/Hamech forklift fluid specs

Q: What lubricants do I use in my Crown or Hamech forklift?

A: It depends. Using the wrong lubricating fluids on your forklift can damage the truck and put the truck’s operator in danger. Check below for the correct forklift fluid specs for various models of Crown and Hamech trucks.

forklift fluid specs

MAX50 (gasoline/LPG engine): G15, G18, and G20(A)(S)HT-20

•  engine oil pan = engine oil (SAE 5w-30SJ)motor oil Intella Liftparts forklift fluid

•  TORQFLOW transmission case = DEXRON automatic transmission fluid

•  differential case = gear oil (SAE80W or 90W)

•  hydraulic tank = hydraulic oil ISO #32

•  brake reservoir = brake fluid (DOT 3) (SAE7OR-3)

•  greasing points = lithium grease (NLGI No. 2)

 cooling system = glycol-based coolant

MBX50 (gasoline/LPG engine): G20, G25, G28, G30, G32(S)(H)T-16, and G35AHT-16

•  engine oil pan = engine oil (SAE 5w-30SH)

 TORQFLOW transmission case = DEXRON automatic transmission fluid

•  differential case = gear oil (SAE80W or 90W)

 hydraulic tank = hydraulic oil ISO #32

 brake reservoir = brake fluid (DOT 3) (SAE7OR-3)

 greasing points = lithium grease (NLGI No. 2)

•  cooling system = non-amine long-life type

MBX50 (diesel engine): D20, D25, D28, D30, D32T-16, and D35AT-16

•  engine oil pan = engine oil (SAE 5w-30CH or SAE30W-30CH)

•  TORQFLOW transmission case = DEXRON automatic transmission fluid

 differential case = gear oil (SAE80W or 90W)

•  hydraulic tank = hydraulic oil ISO #32

•  brake reservoir = brake fluid (DOT 3) (SAE7OR-3)

 greasing points = lithium grease (NLGI No. 2)

 cooling system = non-amine long-life type


Post by Intella Liftparts

Leave a Reply

Your email address will not be published. Required fields are marked *

Time limit is exhausted. Please reload CAPTCHA.