Note: Click here to shop Genie Aerial Wheels
Your scissor lift takes a boat load of charged batteries to operate properly. For most of them, that number is four. These battery trays that hold the charging system are set up generally in the same way. Some trays have 4 batteries in a row, others in a 2 by 2 setup. Either way, they feature a 24V battery charger to keep the batteries in shape. A workhorse of the scissor lift, this battery charger needs to be in tip-top shape. When yours starts to get bogged down, do us a favor and check out Intella Liftparts. Intella offers a 24V Genie scissor lift charger capable of servicing many different scissor lifts. The charger will work on almost any scissor lift battery, including one of the most common brands, Trojan.
Will it work on a Genie? Yes
Will it work on a Sky jack? Yes
Will it work on a MEC? Yes
Two different types of AC power cords depending on your model.
One type has a 90 degree input plug, the other type has a straight input plug.
Disregard whichever plug your Genie doesn’t use.
DC Output cord (positive/negative): approximately 30 inches / 75mm
Features easy to view charge capacity indicator: 50%, 75%, 100%
Voltage: AC Input – 115V/230V (Automatically selects); DC Output – 24V nominal
Max. Current: AC Input – 9A at 85V/4.5A at 170V; DC Output – Max. 19 ADC
Frequency: AC Input – 60/50 Hz
Phase: AC Input – Single
Output Power Max: DC Output – 600 Watts
Height: 6.25 inches / 160mm
Width: 6.8 inches / 175 mm
Depth: 8.5 inches / 200mm
Weight: 11 lbs
Used on the following Genie aerial work platform models:
GR-20 GRC-12 GS-1530 GS-1532
GS-1930 GS-1932 GS-2032 GS-2046
GS-2632 GS-2646 GS-3232 GS-3246
QS-12R QS-12W QS-15W QS-15R
QS-20R QS-20W TZ-34/20 TZ-50/30