Zapi Error Codes

Zapi makes parts for the following forklift manufacturers: Yale, Hyster, Crown, and more.

The following will be PDFs that can help you in your troubleshooting with Zapi parts:

Number of LED flashes: 1

Possible Alarm Messages:
EEPROM DATA KO

EEPROM PAR. KO

EEPROM CONF. KO

EEPROM OFF-LINE

CHOPPER NO CONF

WATCH-DOG

Type of Alarm: Logic Test Fail

We offer Zapi handsets for testing your Zapi controller
(click image to go to product)
Many Zapi systems use this battery discharge indicator
We offer remanufactured Zapi controllers like this one for Hyster

Post by Intella Liftparts

Danaher Troubleshooting Codes

Inmotion is a manufacturer of control systems for electric forklifts.  If you open an electric forklift which is made by Yale or Hyster, there’s a good chance you’ll find a control system labelled with “Inmotion” or Danaher”. Danaher/Inmotion have been known as other names over the years, a timeline from their corporate website can be found below:

Timeline:

2014 – Zapi S.p.A aquires EVS from Danaher. Company name is changed to Inmotion

2009 – Vehicle business (EVS) of Danaher Motion changes name to the Kollmorgen brand

2002 – All Danaher owned motion control businesses adopt common brand Danaher Motion

2001 – Elmo motors aquired by Danaher and integrated with EVS

1999 – Danaher Corporation aquires Atlas Copco Controls. Company name is changed to Inmotion Technologies

1989 – Atlas Copco aquires GME Systems. Company name changes to Atlas Copco Controls

1967 – GME Systems is founded, making customized electronics for various purposes

The attached PDF contains trouble shooting codes for the common system used on forklifts.  If you need remanufactured or new controllers, contact us for more information.  Or, if you know the part number already, enter it into our search bar on our home page.

Common Error Codes for Danaher

Error code 01:  No seat switch input.

Symptom: Lift truck does not move.

Possible causes and test procedures:

  • Seat switch malfunction.  Check to see that the seat switch operates properly.  Replace seat switch.
  • Check wiring to the seat switch and from the seat switch to the master controller.

Error code 02: The forward switch is closed before the key or seat switch closes.

Symptom: Lift truck does not move.

Possible Causes and Test Procedures:

  • A directional switch is closed when the key switch is turned to the ON position. This violates the Static Return to Off (SRO) Startup Procedure, move the directional lever to the neutral position, and then select a direction.
  • A directional switch is failed closed or out of adjustment.

Error code 03: The reverse switch is closed before the key or seat switch closes.

Symptom: Lift truck does not move.

Possible Causes and Test Procedures:

  • A directional switch is closed when the key switch is turned to the ON position. This violates the Static Return to Off (SRO) Startup Procedure, move the directional lever to the neutral position, and then select a direction.
  • A directional switch is failed closed or out of adjustment.

Error code 04: Park brake applied while the key switch is in the ON position.

Symptom: Lift truck does not move.

Possible Causes and Test Procedures:

  • Park brake is applied. Truck will not operate with park brake applied. Release the park break.
  • Park brake switch is out of adjustment or is shorted.

Error code 05: Start switch fails to close.

Symptom: Lift truck does not move.

Possible Causes and Test Procedures:

  • Malfunction of start switch circuit. Check for open circuit or loose connections in wiring from key switch to start switch and from P16 to start switch.
  • Malfunction of start switch. Check start switch for correct operation and output.

Error code 06: Accelerator depressed, no direction selected.

Symptom: Lift truck does not move.

Possible Causes and Test Procedures:

  • Accelerator pedal is depressed before closing a direction switch. Status code will disappear when directional switch is closed or when accelerator pedal is released.
  • Malfunction of directional switch. Check forward or reverse switch to make sure there is continuity when direction is selected.
  • Open circuit between directional switch and battery.
Danaher controller (click image to view)

Post by Intella Liftparts